Quantcast
Channel: MHH AUTO - Ford, Land Rover, Rover, Jeep, Jaguar, Rolls Royce Discussions.
Viewing all 3695 articles
Browse latest View live
↧

14 Ford Flex Rear View Mirror Connector

February 9, 2019, 1:11 am
$
0
0
14 Ford Flex Rear View Mirror Connector Name Needed.
I don't know the name of this connector and I'm wanting it. Googled for hours looking with no luck.
Maybe someone smarter than me either knows it or can find it. Here is what it looks like.

[Image: Two.jpg]

[Image: One.jpg]
↧
Search

2010 discovery 2.7 staring problem

February 9, 2019, 9:24 am
$
0
0
Hello everyone,i have problem with discovery 4 with 2.7 V6 engine,car wont start,it only cranks.and it look like ecu flash data corrupt but am not sure.
I have sdd software.
I need someone who is good with sdd help me to check the car to be sure exactly what is the problem.and help me to flash ecu to orginal state.
I
Need help via Teamviewer



Sent from my iPhone using Tapatalk
↧
↧

Jeep Cherokee 2012 4WD problw

February 9, 2019, 10:43 am
$
0
0
Dear sirs 
 I have a jeep grand cherokee 2012 the 4 WD light comes on and  codes C14700 transfer case clutch position out of  range
and code U041500.data recived from abs the  car  feels 
 heavy

And nother code in the airmatic  system 
c156298 ride air pump temperature  
Any help please. 
Thank you
↧

2008 - current F250 DPF and EGR off

February 10, 2019, 3:35 pm
$
0
0
Does anyone have any damos files for these applications? I know the 2008 - 2010 used a Siemens SID902 and the 2011 + used various iterations of EDC17. I have been hunting for a very long time for these.

If anyone can help, it will be much appreciated
↧

SSM72586 Range Rover L494

February 11, 2019, 6:22 am
$
0
0
Dear Members,

Anyone here can upload the SSM 72586 for Range Rover Sport year 2014.
I have an issue withe front left side passenger Airbag. DTC B0020-13

Thanks
↧
↧

ford explorer sport trac xlt 2008 wiring diagram

February 12, 2019, 9:05 am
$
0
0
Hello Guys, 
I need a wiring diagram for a ford explorer sport trac xlt 2008 with 4.0 gasoline engine, 
I need the wiring diagram for engine ecu + automatic transmission 

Anyone have this ? 


Thank you  Kolo
Never mind, found it here, if anyone else looking for it : 
Code:
http://www.bbbind.com/free-tsb
↧

Ford Transit mk8 2.2 155hp takes oil 2 l/1000km

February 12, 2019, 10:03 am
$
0
0
Hi!

I have a problem with FORD TRANSIT MK8 from 2016 Year 2.2 TDCI 155HP.

Car has only 90 000 km milage and it real milage. Car since 5-10 k km start to  burn oil. 
It starts from 1l on every 1000km  now takes 2.5 litres oil on every 1000km. But there is no smoke behind the car.

The oil does not leak under the car beacouse engine is absolutly clear so it must be burned somehow. 
What strange cars takes like before 11l/100km diesel so consumpiton is normal.  The DPF under computer has also 50% soot mass.  Sadsmile Sadsmile

We have checked the turbo pipes going to intercooler and they are dry....
So we start with changing the rngs on the piston on oem brand new. But i does not help.


Does anyone know what it can be?
Should i take out turbo even it looks dry? 
Any other ways to burn oil?
↧

ford focus 2016 usa all key losst!

February 12, 2019, 9:46 pm
$
0
0
hi ford focus usa, all key  losst , what solution?
what device, the keys are programmed
↧
Search

Ford Kuga 2010 TCM Flash need

February 13, 2019, 5:11 am
$
0
0
Hi to all members .
i need to find a flash from gearbox ford kuga 2010 2.0 diesel 

Gear 8M5R-14F085-AD : AV41-7Z369-AJ  
i think PowerShift 6DCT450

I want to downgrade it , because i was on a diler ford and he make me update . after this update i dont like how its drive
that is the reason that i want to make a downgrade . i want to wite back previons flash .
i hear on some forums that is only 3 flash for this gear i want to try how works each of it .
if somebody want to help with these flash i will be grateful .

Thanks!
↧
↧

Jaguar Login ANyone??

February 14, 2019, 8:17 am
$
0
0
Dear MHH Member,

Anyone here have login Topix for Jaguar Land Rover? I will pay. I need some TSB.

Thanks in Advance
↧

How to override IDS IMRC safety?

February 14, 2019, 10:06 pm
$
0
0
Boy this is kind of frustrating.

I am working on a F-150 with a 5.4. I am having issues with the Intake Manifold Runner Control system. Unfortunately you cannot access the IMRC servo without removing the intake manifold. 

The issue I am having is IDS will NOT allow active command of the IMRC servo unless the engine is running. Does anyone know a way around this? It seems like this is some kind of safety thing with IDS to prevent injury or something. :/


I would love to be able to plug the servo in and test it without the engine running. And/or test the replacement if that's what it comes down to.

Thanks! Smile
↧

Bosch VCI Software (Ford-VCM-II) - 2.1.1.5 (i need)

February 15, 2019, 12:21 pm
$
0
0
Hi

Im looking:

Bosch VCI Software (Ford-VCM-II) - 2.1.1.5 (i need)

Can anybody share??
↧

Mondeo MK4 battery drain. Power consumption about 0.8A

February 16, 2019, 10:13 am
$
0
0
I have prpblem with power consumption. Mondeo go sleep after 10-20 min and i have 0.19A but after few minutes power consumption increase to 0.8A.

I put off all fuses and relays and nothing change.
When I cut power from BCM is ok. Or
When i put off plug CP3  from BCM is ok.
When i cut off power from rear fuse box also ok.

Which modules don't have fuses and relays? Magic?
Mondeo MK4 2.2 2011
↧
↧

2013 Range Rover TCM update?

February 18, 2019, 6:26 am
$
0
0
Hello Good day i am having some issues with the TCM for range rover evoke, can any assist me with updates for the TCM or how it is done with SDD ??
↧

Connect MaxiFlash Pro with Abrites

February 18, 2019, 1:05 pm
$
0
0
Hola
¿Quién puede ayudarme con esto?

Tengo una interfaz Maxiflash Pro que funciona con el protocolo J2534, también tengo el Abrites Commander para Jeep, pero no puedo conectarlo a la interfaz con el programa.

Debe tenerse en cuenta que tengo los controladores y que la computadora reconoce la interfaz sin Problema.


su soporte, por favor,

conecte MaxiFlash Pro con Abrites
↧
Search

jaguar XF Heater problems

February 19, 2019, 12:50 pm
$
0
0
Jaguar XF MY2011, 3.0 diesel
I have the following errors after scanning with IDS and wondering if they are related
No hot air regardless of setting
Vents not opening or closing and they are set to auto
Outside temperature is always on minus 40c
Passenger mirror motor shows error with motor but mirror is working
LIN Bus A


I have checked all wiring and connectors but cannot find any faults
↧

Ford Kuga 2008 Lack of power P003a

February 19, 2019, 2:27 pm
$
0
0
Hy guys.
I've bought a Ford Kuga 2008 2 months ago with a lack of power and with the warning engine malfunction  on the dash. I tought at that moment it was a deal because i was a mechanic for some years and i will solve the problem very quick.
I've started with a diagnose and found out 3 errors :
-p003a
-p0299
-p2263
I've checked the vacum lines and changed the brown valve for turbo .
At that point there were periods when the car was running ok( not perfect) and i tought i am on the right way but it started to lose power again and most of the times the "engine malfunction" did not appear.
I have changed the wastegate with the sensor on it , i've checked the wires to it and i've started to swap parts from my other mondeo mk4 2008 that had the same engine ( egr , temp sensors ,pressure sensors)
But nothing changed. 
I wanted to leave at the end the turbo but after all of this i decided to change it with an refurbished one from e-bay thinking that something is wrong with the geometry.
After i changed the turbo there was a little hope but it was only playing with my mind because 1 day was running better than it was but the other day was the same as the begining.
I bought a new Dpf and a catalytic converter but nothing changed.
One of my friend even checked the software and he found some little modifications but he made it back as it was original but still no change.
I have to say that there was a day when i've drive it to work and after  deleting that p003a error the car had a moment when it was runing like a 200 bhp engine and i've tried with all my best to see on my tester what was wrong and read the values for turbo and other sensors but there was no difference in values as it was when it didn't work properly



Now after all this the car is running very bad like it was when i bought it and i have no ideea what to do more and i really want to keep the car for my wife because she loves it. 
So please can you all help me find the problem as i am not familiarised with ford and i don't have so.much time to spend on it as i have to use it every day except 2 days on week when i am off. 
I even asked the companybthat sold the turbo if it needs adjustemnt but they said no and if i want i can send it to the to chek it again but i don't have time to take it off again. I want to specify that the old turbo was alright and  i have a spare turbo now. 
I hope i remembered everything i've done
Thank you very much
↧
↧

Jaguar XF 2009 BCM dump needed

February 20, 2019, 4:36 am
$
0
0
Hello! 
Mine BCM was bricked while updating by SDD. Maybe some one have the full dump for MC9S12HZ256.

FSJB-ACSW
7340-9554-30
8X2T-14B476-AD

Thanks!
↧

ford visteon esu-131

February 21, 2019, 12:26 am
$
0
0
Hello mates! Need info how to do clone on a ford ecu visteon esu-131 ? k-tag as i see no this ecu for full read..
↧

Ford Focus 2007 automatic need ecu diagram

February 22, 2019, 9:15 am
$
0
0
Hi all can someone help with a diagram for this focus it has a fault p2121 throttle position sensor I have tested all the wiring from throttle and changed the throttle still same tested the clocks the peddle and the ecu looks like it’s been changed. If someone can help with a ecu diagram and Componunt location thanks
↧
Viewing all 3695 articles
Browse latest View live
Search