Hi all , if anyone can help me .
I have a Ford Ranger 2.2 - giving off this fault code :
P0341:62-2E CAMSHAFT POSITION SENSOR #A CIRCUIT RANGE/PERFORMANCE FAULT
Ive reset the engine timing as accurate as i could .
ECU Adaptions have been reset .
Wiring has been all opened and checked .
Removed gearbox and checked flywheel (cranksensor pickup)
Ive tried another ECU and same fault .
Ive tried 2 other cam sensors - same fault .
Ive removed the top cover and the camsensor picks up from the camshaft lobe .
Ive even adjusted on the cam pulley - alternating the timing for the pickup and still ....
Anyone have experience with this ?
I have a Ford Ranger 2.2 - giving off this fault code :
P0341:62-2E CAMSHAFT POSITION SENSOR #A CIRCUIT RANGE/PERFORMANCE FAULT
Ive reset the engine timing as accurate as i could .
ECU Adaptions have been reset .
Wiring has been all opened and checked .
Removed gearbox and checked flywheel (cranksensor pickup)
Ive tried another ECU and same fault .
Ive tried 2 other cam sensors - same fault .
Ive removed the top cover and the camsensor picks up from the camshaft lobe .
Ive even adjusted on the cam pulley - alternating the timing for the pickup and still ....
Anyone have experience with this ?