Morning everyone,
Has anyone had an issue with resetting the dpf data on a kuga. It’s a 2013 2.0 TDCI (TXMA)
Basically these codes won’t clear:
P2463:00-AF: dpf restriction
P246B: conditions not met
P24A4: soot accumulation
We have cleaned the dpf and seems to get .8psi from the pressure pipe on idle after the clean. I have reset the dpf data but the dpf system percentage of the maximum soot loading is at 302% all the time and won’t reset/update.
Has anyone seen this before? The car reads less than 1kpa on idle on live data and up to 16kpa on full throttle.
Any help would be appreciated![Smile]( "Smile")
Has anyone had an issue with resetting the dpf data on a kuga. It’s a 2013 2.0 TDCI (TXMA)
Basically these codes won’t clear:
P2463:00-AF: dpf restriction
P246B: conditions not met
P24A4: soot accumulation
We have cleaned the dpf and seems to get .8psi from the pressure pipe on idle after the clean. I have reset the dpf data but the dpf system percentage of the maximum soot loading is at 302% all the time and won’t reset/update.
Has anyone seen this before? The car reads less than 1kpa on idle on live data and up to 16kpa on full throttle.
Any help would be appreciated
