Hi everyone,
I´m searching for any help for this problem I have with this ford. I give you all background info:
3 months ago the car had following issue: 3 times the alternator was destroyed. Then Ford found solution that the control unit from engine managed over 16 v, so it should be the reason why alternator was few times destroyed.
Up to this point the engine worked normally, so I had 100 % power.
After this I had decided to send the control unit for repair. The control unit was cloned and I couldn´t start the car, so I send it again and received another control unit and the car started but now I have the problem I have no power. It´s even not possible to drive because I have no power and engine speed is limited to 1500 rpm. The engine does not work correctly. I have done a video. Please check at in the attachement.
The oroginal control unit is dead. I think memory was swapped. Nowadays I have 3 different control units and with every control unit the car have no power. There is only one mistake in engine but this error the car has got over a year:
P2564 Turbo Boost Control Position Sensor Circuit Low
[url=https://www.obd-codes.com/p2564][/url]I´ve tried to adapt the injectors but I didn´t found for this engine a possibility to adapt them. It seems Ford has a different way or it´s simply fixed values in the control unit from the engine.
Is there someone who can give me a hint or/and is a diagnostic pro for FORD and can help me? I have Ford diagnostic. Maybe teamviewer help possible?
All kind of help is aprreciated![Smile]( "Smile")
Thanks Paul
I´m searching for any help for this problem I have with this ford. I give you all background info:
3 months ago the car had following issue: 3 times the alternator was destroyed. Then Ford found solution that the control unit from engine managed over 16 v, so it should be the reason why alternator was few times destroyed.
Up to this point the engine worked normally, so I had 100 % power.
After this I had decided to send the control unit for repair. The control unit was cloned and I couldn´t start the car, so I send it again and received another control unit and the car started but now I have the problem I have no power. It´s even not possible to drive because I have no power and engine speed is limited to 1500 rpm. The engine does not work correctly. I have done a video. Please check at in the attachement.
The oroginal control unit is dead. I think memory was swapped. Nowadays I have 3 different control units and with every control unit the car have no power. There is only one mistake in engine but this error the car has got over a year:
P2564 Turbo Boost Control Position Sensor Circuit Low
[url=https://www.obd-codes.com/p2564][/url]I´ve tried to adapt the injectors but I didn´t found for this engine a possibility to adapt them. It seems Ford has a different way or it´s simply fixed values in the control unit from the engine.
Is there someone who can give me a hint or/and is a diagnostic pro for FORD and can help me? I have Ford diagnostic. Maybe teamviewer help possible?
All kind of help is aprreciated
Thanks Paul