Hi Guy's, I did an ABS sensor yesterday on my 2011 l322 (turns out its the ABS ring (which ive ordered).
Anyway, while I was working, I was opening & shutting the door as my phone & vape was in there..
Upon building everything back up, I jumped in to start it and when I press the start button, I get the LCD screen coming on & then going off.
I just assumed that id flattened the battery, so I connected some jump leads & tried to start it but still the same problem.
Ive plugged it in this morning & amongst others, ice getting fault code: B1B33-87
Full list of diagnostic codes can be found here: range rover 4.xps
but please bare in mind that I know about the ABS faults.
Can anyone please point me in the right direction as this is doing my head in now.
Many thanks in advance
ASH
Anyway, while I was working, I was opening & shutting the door as my phone & vape was in there..
Upon building everything back up, I jumped in to start it and when I press the start button, I get the LCD screen coming on & then going off.
I just assumed that id flattened the battery, so I connected some jump leads & tried to start it but still the same problem.
Ive plugged it in this morning & amongst others, ice getting fault code: B1B33-87
Full list of diagnostic codes can be found here: range rover 4.xps
but please bare in mind that I know about the ABS faults.
Can anyone please point me in the right direction as this is doing my head in now.
Many thanks in advance
ASH